Shop:

Navigate:  StoreFront / Jinma 200 Series / Steering and 3-Point Hydraulic System
 Page of 3  >   >>

Steering and 3-Point Hydraulic System

Jinma Adapter 160YZ.40.105-3
In Stock
Connector Pipe for Hydraulic Steering
$15.00
Jinma Adjustable Link Arm 284.01.05
In Stock
3-Point Adjustable Link Arm
$47.00
Jinma Adjusting Chain Assembly 184.56.033
In Stock
3-Point Adjusting Chain Assembly
$43.00
 
Jinma Adjusting Pipe Female 184.56.041-a
In Stock
3-Point Adjusting Pipe
$25.00
Jinma  Adjusting Rod 184.56.043-a
In Stock
3-Point Adjusting Pipe Male
$25.00
Adjusting Sleeve160.56.133
In Stock
Adjusting Sleeve160.56.133....
$18.00
 
Jinma Adjusting Stabilizer Square Assy 184.56.041
In Stock
3-Point Adjusting Pipe, Adjusting Stabilizer Square Assembly
$50.00
Adjusting Yoke 160.20.101
In Stock
Adjusting Yoke 160.20.101
$9.50
Bushing Steering Cylinder
In Stock
Bushing Steering Cylinder..160YZ.40.102
$20.00
 
Cat 1 Forged  152IP
In Stock
Cat 1 Forged 152IP
$10.00
Chain Pin 160.56.042
In Stock
Chain Pin 160.56.042..Goes with Lower Link Tube style
$10.00
Connecting Link 300 Series YT300B.55.109
In Stock
Connecting Link 300 Series YT300B.55.109
$25.50
 
Connecting Rod 3-point arm
In Stock
Connecting Rod 3-point arm..160.56.102
$36.00
Connector 160.54.021a
In Stock
Connector 160.54.021a
$45.00
Connector 160.54.021b
In Stock
Connector 160.54.021b
$45.00
 
Connector 160.54.109
In Stock
Connector Plate Manifold 160.54.109
$35.00
Connector 160YZ.40.103-2
In Stock
Connector 160YZ.40.103-2
$8.00
Control Lever 3-Point
In Stock
Control Lever 3-Point..3016
$40.40
 
Cover 160.37.155
In Stock
Cover 160.37.155
$20.00
COVER 184.21S.120
In Stock
COVER 184.21S.120
$95.00
Cover PTO shaft 160.37.160
In Stock
Cover PTO shaft 160.37.160
$150.00
 
Cylinder Power Steering 200
In Stock
Cylinder Power Steering..Horizontal Small Shaft
$245.00
Cylinder Power Steering-2
In Stock
Cylinder Power Steering Style 2..184YZ.40.041..This cylinder is shorter and hose connections are on the opposite end..Has Horizontal eye
$225.00
Jinma Cylinder Steering SG-D45X160 Keno Tractors
In Stock
Cylinder Steering SG-D45X160, Jinma 200, Jinma 300 Series
$250.00
 
Jinma Distributor Valve 18FP.57.001 Keno Tractors
In Stock
Distributor Valve 18FP.57.001, Jinma 200 Series
$150.00
Distributor Valve Handle
In Stock
Distributor Valve Handle 18FP.57.117-1
$10.00
Front Adjusting Link 300 Series E300.55.169
In Stock
Front Adjusting Link 300 Series E300.55.169
$8.00
 
Horse Shoe Link 2.5"
In Stock
Horse Shoe Link 2.5"..Lower Link 200
$7.00
Horseshoe Link 3"
In Stock
Horseshoe Link 3"..10.28MM Thickness
$7.00
HORSESHOE LINK2.5"
In Stock
HORSESHOE LINK2.5"..13.96MM THICKNESS
$7.00
 
Hyd Fitting 180.54.101
In Stock
Hyd Fitting 180.54.101 Note: Hydraulic fittings are non-refundable. Please call before ordering so we can ensure you receive the correct fitting.
$16.50
Hyd Fitting 2.5"L
In Stock
Hyd Fitting 2.5"L 2.5"L..Cappell...65"THREAD..Bucket and Boom Note: Hydraulic fittings are non-refundable. Please call before ordering so we can ensure you receive the correct fitting.
$18.00
Hydraulic Adjusting Rod
In Stock
Hydraulic Adjusting Rod..160.55.128-2
$45.00
 
Hydraulic Filter Housing
In Stock
Hydraulic Filter Housing..JX0811A
$45.00
Hydraulic Fitting 3/4"
In Stock
Hydraulic Fitting 3/4" female to 7/8" male Note: Hydraulic fittings are non-refundable. Please call before ordering so we can ensure you receive the correct fitting.
$12.00
Hydraulic Fitting 8-8 G6X-S
In Stock
8-8 G6X-S Note: Hydraulic fittings are non-refundable. Please call before ordering so we can ensure you receive the correct fitting.
$11.50
 
Hydraulic PTO Pump Spacer
In Stock
Hydraulic pto pump spacer
$25.00
Hydraulic Pump CBFT-F310B
In Stock
Hydraulic Pump CBFT-F310B..Rectangle..holes on both sides
$195.00
Hydraulic Pump CBN-E14
In Stock
Hydraulic Pump CBN-E14..holes on right and bottom left
$195.00
 
Hydraulic Pump CBN-E310
In Stock
Hydraulic Pump CBN-E310..holes on both sides..short spline
$195.00
Hydraulic Pump CBN-E310 -
In Stock
Hydraulic Pump CBN-E310..holes on right and bottom left..Long spline
$195.00
Hydraulic Pump CBN-E310 (A)
In Stock
Hydraulic Pump CBN-E310 (A)..for a 354..Rectangle..short spline..holes on both sides
$195.00
 
Jinma Hydraulic Pump CBN-E314SH Keno Tractors
In Stock
Hydraulic Pump CBN-E314 keyed shaft, suction off side, pressure on bottom
$195.00
Hydraulic Pump CBN-E314 R
In Stock
Hydraulic Pump CBN-E314 R..Rear hyd. port..short shaft..std bolt pattern
$200.00
Hydraulic Pump CBN-E314L
In Stock
Hydraulic Pump 300 Series..CBN-E314L..hyd. port on back of pump..short shaft..old bolt pattern
$185.00
 
Jinma Hydraulic Pump CBN-E314LO Keno Tractors
In Stock
Hydraulic Pump CBN-E314LO, long shaft, Jinma 200, Jinma 300 Series
$195.00
Jinma Hydraulic Pump CBN-E314QC Keno Tractors
In Stock
Hydraulic Pump CBN-E314QC, Jinma 200, Jinma 300 Series
$195.00
Hydraulic Pump CBN-E316A
In Stock
Hydraulic Pump CBN-E316A..long spline..Rectangle - holes on both sides
$195.00
 
Hydraulic Pump CBT-E310
In Stock
Hydraulic Pump CBT-E310..HL1212R..Rectangle - holes on the right
$195.00
Hydraulic Pump CBT-E312
In Stock
Hydraulic Pump CBT-E312..Rectangle - holes on the right
$195.00
 Page of 3  >   >>
 
866-363-8193
Returning Customer?
Privacy Policy Shipping Policy Return Policy
Shopping Cart
 

The Shopping Cart is currently empty

Shopping Cart by Nexternal
Note: Freight displayed may be higher than actual shipping costs. Keno Tractors will always ensure you get the lowest freight possible! Please call if you have concerns.

Orders placed after 1pm PST will be processed the next business day.